Glow in the Dark Powder

The Glow-in-the-Dark Powder is applicable to fabric, metal, glass, tiles, plastic and skin. Currently only yellow green is the longest glow time – around 8 to 12 hours after absorbing 1 hour light. It is proven that the Candy Glow in the Dark powder can be even brighter when it is absorbing the light under a strong spotlight.

Candy Glow in the dark powder are using Alkaline Rare Earth Metal Silicate-Aluminate Oxide Europium Doped. It is NEXT GENERATION long persistence phosphorescent pigment (alkaline earth aluminate activated by rare earth ions). They can be recharged over and over indefinitely. The brightness and length of persistence time is ten times than those of conventional phosphor zinc sulfide found in your local stores. It is ten times brighter and glows ten times longer than the sulfide type Photoluminescence Materials.

Glow Color Yellow Green
Brightness Rating 3209 mcd/m2
Excitation UV,
White light (any Visible light)
Wavelength 200 ~ 450nm
Peak Value 520 nm
Shelf life Over 10 years
Relative Brightness mcd/m2
0 minute 3209
1 minute 580
10 Minutes 160

Application area

Use the 1 inch small foam brush to apply on the substrate that you needed.

Substrate

Application method

On Paper Mix with stationery clear glue
On Clothes Mix with clear primer
On Wood Mix with clear wood paint
On Cement Mix with epoxy paint
On Glass Mix with glass primer
On Wall Mix with any clear emulsion paint
If you need to remove it later on, please use stationery clear glue
On Skin We strongly recommend to mix with clear face mask that purchased from beauty shops.
On skin for running purpose You can mix with primer and later on use the sticker remover cleanser to remover from your skin

Quotation Form


Please fill in your details below:

* indicates required field